all category

Your exclusive Consultant:Mrs.Wang

Telephone:13605213465

Address:Jiangsu Province mine in Xuzhou City Road No. 21

web:en.audelo.com

company profile

your are here:Home >skills> Production of roller damping block and rubber pier

Production of roller damping block and rubber pier

Among the roller accessories, today we want to talk about the shock absorber of the roller.
After the inspection and repair of the roller shock absorber, the working performance test shall be conducted on a special test bench. When the resistance frequency is 100 ± 1mm, the resistance of its extension stroke and compression stroke shall meet the requirements. For example, the stretching stroke resistance of liberation cal091 is 2156 ~ 2646n, and the compression stroke resistance is 392 ~ 588n; The extension stroke resistance of Dongfeng locomotive is 2450 ~ 3038n, and the compression stroke resistance is 490 ~ 686n.
Rubber has both high elastic state and high viscosity state. The elasticity of rubber is produced by the change of its curly molecular conformation. The interaction between rubber molecules will hinder the movement of the molecular chain, showing the characteristics of viscosity, so that the stress and strain are often in an unbalanced state. This curly long-chain molecular structure of rubber and the weak secondary force between molecules make rubber materials present unique viscoelastic properties, which have good shock absorption, sound insulation and cushioning properties.
 
Generally, the scraper drive shaft of the paver is sold as a whole set when purchased by customers. Of course, the above accessories can also be purchased separately. Imported bearings and customized sprocket made of wear-resistant materials make the scraper drive shaft more secure in use.
 
 
Rubber components are widely used to isolate vibration and absorb impact because of their hysteresis, damping and reversible large deformation. In addition, rubber also has hysteresis and internal friction characteristics, which are usually expressed by loss factors. The larger the loss factor, the more obvious the damping and heat generation of rubber, and the more obvious the damping effect. In conclusion, the rubber shock absorber made of rubber also has a good shock absorption effect.
Purchase high-quality roller damping block, contact manager Wang 13605213465
Wechat (same as above)
Email: 2630750628@qq.com
Disclaimer - part of the content comes from the network! This article is only for exchange and learning, and the copyright belongs to the original author. Some pictures and contents cannot be contacted with the original author in time when they are pushed. If the source is marked incorrectly or infringes your rights and interests, please inform us, and we will delete them immediately